Cream of the Crop 25

home *** CD-ROM | disk | FTP | other *** search

/ Cream of the Crop 25 / Cream of the Crop 25.iso / bbs / eumal704.zip / EUMAIL.DOC < prev next >

Wrap

Text File | 1997-04-28 | 33KB | 660 lines

EUMAIL.DOC 1 Apr 28, 1997 The EUMAIL.EXE program does some summarizing for the Eudora Internet e-mail program. What is Eudora? Eudora is an excellent Internet e-mail program. It's put out by QUALCOMM Incorporated in San Diego California. The latest version of Eudora Light can be found on ftp.qualcomm.com, in the directory quest/windows/eudora/1.5. The Windows freeware user manual can also be found on ftp.qualcomm.com, in the directory quest/windows/eudora/documentation. EUMAIL, on the other hand, is a freeware utility which reads Eudora's files and provides the following benefits: * Allows you to save your Eudora nickname file (containing individuals and groups with the corresponding e-mail addresses) as a DOS text file which is useful for searching and such. (Have you ever tried to find out where all you have someone's e-mail address referenced in your nickname file?) * Presents a summary of how many messages you have in each of your mail folders, including their date range and their total size in bytes, plus what share of total mailbox bytes this particular folder accounts for. * Allows you to dump all (or a subset of your mailboxes) as straight ASCII- text files. There will be one text file per mailbox, prefaced by a table of contents for all messages in that mailbox. * Allows you to write out just the table of contents as an ASCII text file. * Allows you to write each individual message as an incremented file name (TRASH.001, TRASH.002, etc). * Allows you to process all mailboxes or all mailboxes whose names begin with a certain string. * The date format shown is based on your country setting as detected by DOS. * Pressing escape stops the program early. EUMAIL.DOC 2 Apr 28, 1997 Quickie instructions: Okay! You hate to read. I know that. And there aren't any cute pictures in this documentation and, like everything I write, it's way too long to keep your attention for long. So, let's bottom line it; what's the quickest way to use this program without learning any of the options? Make sure you've extracted EUMAIL.EXE from the EUMALymm.ZIP file. Run it. The first time it's run, EUMAIL will try to find your main Eudora subdirectory. It will scan drive C, then D, etc looking for the EUDORA.EXE (or the older WEUDORA.EXE) file. Once it finds it, it will tell you where it found the file and ask if you want to save this location in an INI file. If you say "Y" (yes), it will create a EUMAIL.INI file for you and store the location there. The next time you run EUMAIL, it will not need to scan for the subdirectory. Then it will do a bunch of status messages and create two text files in your Windows' TEMP subdirectory (typically C:\TEMP). It will tell you the two files it creates but they default to EUMAIL.TXT and EUMAIL.BOX. Use a file viewer or the Windows NotePad program to view these files. They are described below. Type in "EUMAIL /?" and try out some of the other parameters. If you find yourself consistently overriding some of them, they can be saved in a EUMAIL.INI file. Read the BRUCEINI.DOC file for information on how to do this. EUMAIL.DOC 3 Apr 28, 1997 EUMAIL.TXT: The e-mail data base: EUMAIL creates a dump of your e-mail data base. By default, this file will be called EUMAIL.TXT (override with /NL=filename parameter) and will be stored in your Windows' TEMP subdirectory (e.g. C:\TEMP). This file includes all of your nicknames and comments (the use of comments is heavily recommended). This is an ideal file to use the DOS FIND command (or the Wayne Software BFIND command) to search through. A sample of the format: BanBruce : Bruce Guthrie <bguthrie@doc.gov> BanForrest : Forrest Williams <fwilliams@doc.gov> BanJoe : Joe Correia jcorreia@doc.gov BanTravis : Travis Mayo <tmayo@doc.gov> WS_READ : Billy Rudock <billy_rudock@notes.seagate.com> [2]: Les Ferch <ferch@cce.ubc.ca> [3]: Martin Mossakowski <mossako@asterix.uni-muenster.de> [4]: Tony Vincent <tonyvinc@iconz.co.nz> XList > requests: majordomo@chaos.taylored.com XList > msg: SUBSCRIBE X-FILES XList > msg: SUBSCRIBE X-FILES-DIGEST XList > msg: UNSUBSCRIBE X-FILES XList : x-files@chaos.taylored.com The fields in the file are: * The nickname you've defined for this user * The actual name (if any) of that user * The e-mail address for that user Comments are indicated with ">" entries and they appear before the actual entry. Nicknames which define multiple users are sorted by actual name and then by e-mail address. Typically, as is shown above, only the first instance of the nickname is shown with all of the individual contacts shown with item counts. Alternatively, you can use the /REPEAT option and the nickname label will repeat for each item. The latter option is useful when you are using the FIND or BFIND command to searchfor all members of a particular group. EUMAIL.DOC 4 Apr 28, 1997 EUMAIL.BOX: The summary of your Eudora mailboxes and folders: EUMAIL creates a summary of all the mailboxes and folders you've created. By default, this file will be called EUMAIL.BOX (override with /NS=filename parameter) and will be stored in your Windows' TEMP subdirectory (e.g. C:\TEMP). This file shows, for each of your boxes, the following information: the number of messages, their date range, the size of the box in bytes, and what percent of total bytes consumed each box accounts for. A fairly complete dump of what mine looked like when I ran it: C:\TEMP\PHONMAIL.OUT generated 10-18-1996 00:54:08 by EUMAIL.EXE Box/folder name msgs % of earliest -> newest bytes % of msgs bytes In 34 1% 05-21-96 -> 10-16-96 324,042 2% Trash 346 9% 11-15-94 -> 10-17-96 1,156,646 7% Out 256 6% 10-14-96 -> 10-16-96 463,945 3% ... (portion deleted to make it fit on the page) ... Wayne 187 5% 04-07-96 -> 10-16-96 426,159 3% X-Files 28 1% 04-07-96 -> 10-16-96 130,698 1% Humans Arlene 343 9% 08-12-96 -> 10-16-96 1,157,929 7% Family 46 1% 01-19-96 -> 10-07-96 67,100 0% Munchkyn 29 1% 12-15-95 -> 10-15-96 47,420 0% Webman 50 1% 02-02-96 -> 10-15-96 99,420 1% 4 boxes 468 12% 12-15-95 -> 10-16-96 1,371,869 9% Humor __Progress 139 3% 04-28-96 -> 10-15-96 381,048 2% _Cartoons 67 2% 04-28-96 -> 10-05-96 437,440 3% _Comedians 64 2% 05-01-96 -> 10-08-96 357,953 2% ... (portion deleted to make it fit on the page) ... _Songs/Lyrics 6 0% 05-11-96 -> 08-13-96 15,852 0% _TV/Movies 7 0% 05-20-96 -> 10-05-96 54,606 0% 8 boxes 830 21% 02-06-96 -> 10-15-96 2,876,881 18% Keep 1993 3 0% 10-22-93 -> 10-24-93 7,907 0% 1994 3 0% 05-18-94 -> 12-11-94 20,506 0% 1995 27 1% 01-05-95 -> 12-29-95 78,193 1% 1996 85 2% 01-02-96 -> 02-28-96 226,929 1% 0_Hold 87 2% 10-28-95 -> 09-16-96 193,348 1% 5 boxes 205 5% 10-22-93 -> 09-16-96 526,883 3% Misc Misc 19 0% 03-16-96 -> 10-10-96 46,542 0% NMAA 6 0% 09-28-95 -> 09-28-96 23,172 0% Resends 41 1% 09-01-96 -> 10-01-96 10,378 0% Websites 16 0% 02-20-96 -> 07-19-96 33,831 0% Work 1 0% 04-08-96 -> 04-08-96 10,867 0% 5 boxes 83 2% 09-28-95 -> 10-10-96 124,790 1% Out_Prev Wk39 380 9% 09-23-96 -> 09-29-96 1,168,188 7% Wk40 384 10% 09-30-96 -> 10-06-96 810,029 5% Wk41 244 6% 10-07-96 -> 10-13-96 505,446 3% 3 boxes 1,008 25% 09-23-96 -> 10-13-96 2,483,663 16% 37 boxes 4,023 100% 11-15-94 -> 10-17-96 15,588,849 100% EUMAIL.DOC 5 Apr 28, 1997 The program, by default, will automatically display information about "large" boxes based on a combination of three criteria. Lines above will be shown on-screen for any box which exceeds any of the three criteria. The three are: * The total number of messages in the box (/n parameter) * The total number of (thousand) bytes in the box (/nK parameter) * The percentage of total bytes that that box accounts for (/n% parameter) The defaults are /100, /100K, and /5%. If you'd like to turn off the on-screen display entirely, you can specify the /Q parameter. If you'd like the criteria to be based on one or two criteria only, specify an unusually large value for the other parameter(s) (for example, /30000K). Using an INI file for the criteria (see later) is always an option. Header formats: When you request either /DUMP or /HEADERS, the program will generate headers which describe what messages are in your file. The order of the messages corresponds to the order shown in Eudora. Message sizes are shown in lines if /DUMP is used, and in thousand bytes if /HEADER is used. The exact format of the headers depends on your value for the /FORMAT=n parameter. The various formats are: /FORMAT=1: Show one line per mail message. This format closely matches that shown in Eudora itself. This is initially the default for EUMAIL. /FORMAT=2: Show two or more lines per message. The subject gets a line all to itself. You may get three lines for some messages if the length of the "Sender" field is long. /FORMAT=3: Show one line per mail message. This format shows just the message size and subject line; this is useful when you're using Eudora to catalog messages and such and don't really care when they were sent or from whom. EUMAIL.DOC 6 Apr 28, 1997 Examples of each format are shown below (remember, the size of the message is measured in lines if /DUMP is used, bytes if /HEADER is used): Contents: (using /FORMAT=1) 1 Bruce Guthrie 04:31 PM 3/26/96 2 Round robin time 2 Bruce Guthrie 11:44 AM 4/7/96 1 RE: FORB data update 3 Olumoya - Pamela 07:49 PM 4/7/96 14 Posting Guidelines for X-Files-Fanfic 4 Heather and Eric 07:29 PM 4/19/96 4 re: Vancouver locations for x-filese Contents: (using /FORMAT=2) 1 Bruce Guthrie 04:31 PM 3/26/96 2K Round robin time 2 Bruce Guthrie 11:44 AM 4/7/96 1K RE: FORB data update 3 Olumoya - Pamela 07:49 PM 4/7/96 14K Posting Guidelines for X-Files-Fanfic 4 Heather and Eric 07:29 PM 4/19/96 4K re: Vancouver locations for x-filese Contents: (using /FORMAT=3) 1 2K Round robin time 2 1K RE: FORB data update 3 14K Posting Guidelines for X-Files-Fanfic 4 4K re: Vancouver locations for x-filese ASCII dumps: The EUMAIL program will dump the contents of all of your e-mail boxes for you if you'd like. (Optionally, you can specify that it only dump mailboxes whose names begin with a certain character string.) In so doing, it creates a table of contents and divided each article with a page eject for you. The format for this table of contents is discussed above. The ASCII message dump is requested with the /DUMP parameter. A separate dump file (with an extension of *.DMP) will be created for each mailbox. Alternatively, you can request that a separate text file be created for each message, in which case the file extensions will have incremented names (for example, TRASH.001, TRASH.002, etc; after 999 messages, they will start to be named TRASH.A00 etc). All dump files are left in the same subdirectories you mail is in. Note that Eudora places each mail folder in a subdirectory off the current level. You may want to PKZIP one or more of the *.DMP files and then move them out of your Eudora subdirectories, perhaps storing them on a floppy diskette for purposes of retaining them. As long as you are reasonably sure you will not want to be doing responses or something in Eudora, you can delete the messages from the mailboxes you save this way. Personally, I save all of my outgoing messages for some reason. I then save an ASCII version of what I sent, compress it, and then delete them en masse. If you'd like, you can get just the table of contents for the messages and skip the actual dump of the messages themselves. This can be achieved by using the EUMAIL.DOC 7 Apr 28, 1997 /HEADER option. If you later decide you want to kill off all of the *.DMP files, pass in the parameter /KILLDUMP and it will take care of them for you. Specifying parameters: Parameters for this program can be set in the following ways. The last setting encountered always wins: - Read from an *.INI file (see BRUCEINI.DOC file), - Through the use of an environmental variable (SET EUMAIL=whatever), or - From the command line (see "Syntax" below) EUMAIL.DOC 8 Apr 28, 1997 Syntax: EUMAIL [ /Eeudora_sub ] [ /Ooutput_sub ] [ /NL=filename | /-NL ] [ /REPEAT ] [ /NS=filename | /-NS ] [ /n ] [ /nK ] [ /n% ] [ /SHOWEXT ] [ /Q ] [ /DUMP | /HEADERS | /SPLIT | /KILLDUMP ] [ domain ] [ /FORMAT=n ] [ /HEAD=xxxx ] [ /WIDTH=n ] [ /Tpath ] [ /MONO ] [ /Iinitfile | /-I ] [ /-ENV ] [ /? ] where: "/Eeudora_sub" is the location where you installed Eudora. There is no default for this parameter. If no location is provided, the program will scan for the EUDORA.EXE file on all of your available hard disks until it finds it. It will then allow you to save this information in a EUMAIL.INI file so it doesn't need to scan again in subsequent times. (INI files are explained in BRUCEINI.DOC.) "/Ooutput_sub" is the subdirectory in which you want to write the two output files. This subdirectory must exist already. It defaults to whatever you have "SET TEMP=subdir" set in your CONFIG.SYS file. Again, the use of a EUMAIL.INI file is heavily recommended (see BRUCEINI.DOC). "/NL=filename" specifies the filename that the nickname listing is to go to. If no drive/path information is specified, this file will be written to your /Ooutput_sub specification. Otherwise, the name will override the /Ooutput_sub specification. Saying "/-NL" or "/NL=" without any filename indicator will suppress the creation of the nicknames file altogether. Defaults to /NL=EUMAIL.TXT. "/-NL" suppresses the creation of the nickname file entirely. "/REPEAT" says to repeat the names of the nicknames when they're listed. It looks better if you don't repeat them but if you use something like FIND on the file, you might want to have them repeating. Initially defaults to /-REPEAT. "/-REPEAT" is the opposite of "/REPEAT". The name of the nickname only appears once even if it contains five e-mail addresses. There very first example in this documentation shows the output with /-REPEAT. This is initially the default. "/NS=filename" specifies the filename that the mailbox/folder summary listing is to go to. If no drive/path information is specified, this file will be written to your /Ooutput_sub specification. Otherwise, the name will override the /Ooutput_sub specification. Saying "/-NS" or "/NS=" without any filename indicator will suppress the listing of the summary altogether. Defaults to /NS=EUMAIL.BOX. "/-NS" suppresses the creation of the mailbox summary file entirely. EUMAIL.DOC 9 Apr 28, 1997 "/n" specifies that any mailbox with more than "n" entries is to be indicated on the screen when the program runs. The test for this is done independently of the tests for the number or entries or the absolute filesize test; any box with more than /n message or with a filesize bigger than /nK or a share of more than /n% will be displayed unless /Q is specified. Defaults to /100. "/nK" specifies that any mailbox with more than "n" thousand (K) bytes is to be indicated on the screen when the program runs. The test for this is done independently of the tests for the number or entries or the absolute filesize test; any box with more than /n message or with a filesize bigger than /nK or a share of more than /n% will be displayed unless /Q is specified. Defaults to /100K. "/n%" specifies that any mailbox with more than "n" percentage (%) of the total bytes used by all stored mail is to be shown on the screen when the program runs. The test for this is done independently of the tests for the number or entries or the absolute filesize test; any box with more than /n message or with a filesize bigger than /nK or a share of more than /n% will be displayed unless /Q is specified. Defaults to /5%. "/SHOWEXT" shows the message dates as they appear in the Eudora displays. At times, this is confusing since the dates are actually sorted by their internal date format. In addition, if you've changed external date formats or you have one setting in Windows and another in DOS, EUMAIL will blow up with an invalid function error. Thus it's safer to use /SHOWINT which is the initial default. If you do decide to use this option, be sure to read the "COUNTRY Notes" section below. NOTE ABOUT "INVALID FUNCTION CALL" ERROR MESSAGES: If are using the /SHOWEXT setting, you may encounter errors in using this program. The main reason for this is either (a) you've changed your default date format since you started receiving mail using Eudora or (b) your Windows country setting (which is what Eudora uses) is different from what your DOS setting (which is what EUMAIL uses) is. If either of these are the case, you will probably get "invalid function call" errors. See the section on "Country Notes" at the end of this documentation for information on how to set the value in your CONFIG.SYS file. In most cases, simply do not use the /SHOWEXT option and you'll be fine. However, in dire circumstances, you can rename the *.TOC file as *.BAK for any mailbox that gives you trouble and Eudora will automatically try to recreate it for you. This is not, of course, recommended since it may cause problems. "/SHOWINT" shows the message dates in their real internal date format. This is initially the default. "/Q" says that no individual mailboxes are to be indicated on the screen when the program runs. This ignores any /n, /nK, or /n% settings. EUMAIL.DOC 10 Apr 28, 1997 "/DUMP" says to dump the contents of the mailboxes out as plain ASCII text documents. The program generates one text file for each mailbox. The program will also add a table of contents in front of each dump for you. The dump files will be the name of the folder with a *.DMP file extension. Note that the messages will appear in the order they show up when you view them on the screen and you may want to re-sort them all first. See the /HEAD=xxxx parameter too. Defaults to /-DUMP (don't create the dump files). "/HEADERS" says to write out the message headers only, not the actual messages. See the /FORMAT=n parameter below. The header files will be the name of the folder with a *.DMP file extension. "/SPLIT" takes each messages and dumps it as a individual text file. The files will be named as the DOS name of the mailbox with numeric extensions beginning with 001 (for example, TRASH.001, TRASH.002, etc). "/KILLDUMP" deletes any *.DMP files it finds. Also deletes any of the /SPLIT-produced files (for example, TRASH.001) that it finds. This is used if you later decide you don't want any of the *.DMP files around or if you've already moved out the ones you need and you no longer want the rest of them around. (Note: /KILLDUMP will not delete any *.DMP or *.xxx files for you if you've deleted the mailbox itself.) "domain" restricts /DUMP and /HEADERS processing to only those files whose names begin with a particular character string. As an example, if you just want to dump the "Out" mailbox, pass in "OUT" as in "EUMAIL /DUMP OUT". Note that this will also dump other mailboxes whose names begin with "OUT" which may be useful to you. If your mailbox name includes a space, you can specify this by replacing the space with an underscore (for example, "Joke List" can be entered as "JOKE_LIST"). By default, all mailboxes are dumped if any are. "/FORMAT=n" specifies what the headers are to look like in a /DUMP or /HEADERS request. Basically, /FORMAT=1 creates the headers as one line per message, in a manner similar to the way that Eudora itself displays the headers. /FORMAT=2 expands the header information to being two lines. /FORMAT=3 is similar to /FORMAT=1 but the author and date/time are dropped. See the discussion on "Header formats" above for examples of the each type. Initially defaults to /FORMAT=1. "/HEAD=xxxx" specifies that instead of seeing all of the message headers when you dump the messages, it only shows specific lines from the header section. You can use any combination of the following characters: T = "To:" F = "From:" S = "Subject:" D = "Date:" So "/HEAD=S" will give you just the Subject line. Normally, you'll get all of the headers. "/WIDTH=n" specifies that the lines in the EUMAIL.BOX file should not exceed n-characters. If the name of a mailbox exceeds 26 characters (including indentation), the output would be wider than 80 characters. If this is okay with you, feel free to override the specification. The setting is used to shrink columns, not expand them, so if you have short mailbox names and you specify /WIDTH=200, the program will still give you a compact listing. Initially defaults to /WIDTH=80. EUMAIL.DOC 11 Apr 28, 1997 "/Tpath" specifies where to write the temporary files that the routine needs. ISAM data bases are used to store and sort the file names. ISAM files cannot be created reliably on certain types of drives. Examples are "/TC:" and "/TC:\TEMP". If not specified, the routine writes to the following in sequence: - the value of any TEMP, then TMP, environmental variable - C:\TEMP - C:\ "/MONO" (or "/-COLOR") does not try to override screen colors. Initially defaults to "/COLOR". "/COLOR" (or "/-MONO") allows screen colors to be overridden. This is initially the default. "/Iinitfile" says to read an initialization file with the file name "initfile". The file specification *must* contain a period. Initfiles are described in the BRUCEINI.DOC file. Initially defaults to "/IEUMAIL.INI". "/INULL" says to skip loading the initialization file. "/ENV" says to look for %var% occurrences in the command line and try to resolve any apparent environmental variable references. See BRUCEINI.DOC for more information. This is initially the default. "/-ENV" says to skip resolving apparent %var% occurrences in the command line. Initially defaults to "/ENV". "/?" or "/HELP" or "HELP" shows you the syntax for the command. Return codes: EUMAIL returns the following ERRORLEVEL codes: 0 = no problems 250 = operation aborted by pressing Escape 252 = internal restriction breached 253 = no files found 254 = could not find a decent temporary output subdirectory 255 = syntax problems, or /? requested EUMAIL.DOC 12 Apr 28, 1997 COUNTRY Notes: If your DOS COUNTRY setting (which, if not present, defaults to the US date format of mm-dd-yyyy) is different from the setting you have in Windows (which is how the dates are showing up in Eudora), you may get "illegal function call" errors. The following section tells you how to modify the settings. It's modified slightly but is copied from the DOS 6.2 HELP command. The basic format for the COUNTRY command is: COUNTRY=xxx[,[yyy][,[drive:][path]filename]] where: xxx = the country code (see below) yyy = the character set for the country (used for setting keyboard types; we'll ignore this one) [drive:][path]filename = where the COUNTRY.SYS file is For example: COUNTRY=033,,c:\dos\country.sys Says to use France's country code for date, skips the character set entirely, and says COUNTRY.SYS is c:\dos\country.sys Changing default settings: MS-DOS uses the United States as the default setting. You can use the COUNTRY command in your CONFIG.SYS file to change the setting. If you do not specify the location and name of the file containing country-specific information, MS-DOS tries to find the COUNTRY.SYS file in the root directory of your startup drive. EUMAIL.DOC 13 Apr 28, 1997 Specifying supported languages: The following table lists each country or language supported by MS-DOS. The table also lists the character sets you can use with each country code. For example, if you use country code 003, you can use only character set 437 or 850 for the yyy parameter. The first of the two character sets listed for each country or language is its default character set. Country or language Country Character sets code Belgium 032 850, 437 Brazil 055 850, 437 Canadian-French 002 863, 850 Croatia 038 852, 850 Czech Republic 042 852, 850 Denmark 045 850, 865 Finland 358 850, 437 France 033 850, 437 Germany 049 850, 437 Hungary 036 852, 850 International English 061 437, 850 Italy 039 850, 437 Latin America 003 850, 437 Netherlands 031 850, 437 Norway 047 850, 865 Poland 048 852, 850 Portugal 351 850, 860 Serbia/Yugoslavia 038 852, 850 Slovakia 042 852, 850 Slovenia 038 852, 850 Spain 034 850, 437 Sweden 046 437, 850 Switzerland 041 850, 437 United Kingdom 044 437, 850 United States 001 437, 850 Character sets for the following countries or languages are also available with special versions of MS-DOS: Arabic, Israel, Japan, Korea, People's Republic of China, and Taiwan. EUMAIL.DOC 14 Apr 28, 1997 Specifying international time and date formats: The country code specifies the time and date formats used by the following MS-DOS commands: BACKUP, DATE, RESTORE, and TIME. The following table lists the date and time formats related to each country code. For each country code, the "Date format" column shows how MS-DOS displays January 3, 1993, and the "Time format" column shows how MS-DOS displays 5:35 P.M. (with 0 seconds and 0 hundredths of a second). Country or language Country Date code Time format Belgium 032 23/01/1993 17:35:00 Brazil 055 23/01/1993 17:35:00 Canadian-French 002 1993-01-23 17:35:00 Czechoslovakia 042 1993-01-23 17:35:00 Denmark 045 23-01-1993 17.35.00 Finland 358 23.01.1993 17.35.00 France 033 23.01.1993 17:35:00 Germany 049 23.01.1993 17:35:00 Hungary 036 1993-01-23 17:35:00 International English 061 23-01-1993 5:35:00.00p Italy 039 23/01/1993 17.35.00 Latin America 003 23/01/1993 5:35:00.00p Netherlands 031 23-01-1993 17:35:00 Norway 047 23.01.1993 17:35:00 Poland 048 1993-01-23 17:35:00 Portugal 351 23-01-1993 17:35:00 Spain 034 23/01/1993 17:35:00 Sweden 046 1993-01-23 17.35.00 Switzerland 041 23.01.1993 17,35,00 United Kingdom 044 23/01/1993 17:35:00.00 United States 001 01-23-1993 5:35:00.00p Yugoslavia 038 1993-01-23 17:35:00 Character sets for the following countries or languages are also available with special versions of MS-DOS: Arabic, Israel, Japan, Korea, People's Republic of China, and Taiwan. EUMAIL.DOC 15 Apr 28, 1997 Author: This program was written by Bruce Guthrie of Wayne Software. It is free for use and redistribution provided relevant documentation is kept with the program, no changes are made to the program or documentation, and it is not bundled with commercial programs or charged for separately. People who need to bundle it in for-sale packages must pay a $50 registration fee to "Wayne Software" at the following address. Additional information about this and other Wayne Software programs can be found in the file BRUCE.DOC which should be included in the original ZIP file. The recent change history for this and the other programs is provided in the HISTORY.ymm file which should be in the same ZIP file where "y" is replaced by the last digit of the year and "mm" is the two digit month of the release; HISTORY.611 came out in November 1996. This same naming convention is used in naming the ZIP file (EUMALymm.ZIP) that this program was included in. Comments and suggestions can also be sent to: Bruce Guthrie Wayne Software 113 Sheffield St. Silver Spring, MD 20910 fax: (301) 588-8986 e-mail: bguthrie@nmaa.org http://www.geocities.com/SiliconValley/Lakes/2414 Please provide an Internet e-mail address on all correspondence.